LEGACY REM700 SA MAG .243/308 – 10RDS
$72.99
LEGACY REM700 LA MAG 30-06 – 10RDS
$72.99
LEGACY REM700 SA MAG .204/.223 – 10RDS
$72.99Drop-in conversion kit for Remington Model 700 with 5rd Magazine – 223REM/204
LEGACY REM700 MAG DROP-IN KIT – 5RDS
$146.99Polymer Detachable Magazine Drop-In Kit
ADAPTIVE TAC REM870 EX LIGHTED FOREND
$125.99Designed for reliability and built to perform, the EX Performance Tactical Light Forend is an engineered solution to your low light firearm needs. Quickly and easily upgrade your Remington or Mossberg shotgun to be a more versatile defense firearm. Full of features important for low light use, the EX Performance Tactical Light Forend is a tool that every shotgun owner should incorporate into their training.
Compact, powerful 300-lumen tactical flashlight seamlessly integrates into forend body. Three levels of illumination are designed to offer wide, smooth beams ideal for close-range, shotgun applications. Removable light reveals a 2 inch picatinny rail for attaching other accessories, or rail may be concealed under the included nose cap.
TRIGGERTECH DIAMOND AR-15 1.5-4.0LBS
$379.99The TriggerTech AR15 Single-Stage drop-in AR trigger provides a true zero-creep break, extremely short overtravel, a sub 0.030” tactical reset and offers outstanding reliability, even in the harshest environments. Utilizing CLKR Technology™, the pull weight is quickly and confidently be adjusted in 2oz increments from a set screw with the trigger installed. Due to there being truly zero creep, most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured pull weight. Changing the triggers pull weight does not affect hammer force so you get dependable primer strikes at every weight. Zero Creep Technology™, along with hardened 440C stainless steel internal components ensure corrosion resistance and an extended service life. As Zero Creep Technology™ does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot and after thousands of shots than you ever thought possible.
All pull weights and measurements are approximate.
The installation guide is directed to experienced professional gunsmiths who understand the workings of their AR rifle and know how to fully detail strip the lower receiver. If you do not have these skills, we strongly suggest you retain the services of a competent professional gunsmith to install your trigger, and perform all important safety checks.
FENIX ARE-D1 BATTERY CHARGER
$20.99The Fenix ARE-D1 is a single-channel smart charger, built for different types, and different size, rechargeable batteries, whether it be Li-ion, Ni-MH or Ni-Cd. Supports Micro USB charging and USB discharging to keep your other devices charged too. A high-definition LCD screen clearly displays the charging, discharging and battery status. The charger also includes multiple built-in protection circuits that protect against short circuits, over-current, over-voltage and reverse polarity. BATTERIES NOT INCLUDED.
FENIX RECHARGEABLE 18650 BATTERY 2900MAH
$30.99The Fenix ARB-L18-2900 is a high capacity 18650 Li-ion rechargeable with a protection circuit in the anode to help prevent short circuits, over charge/discharge and over heating. The battery also includes pressure relief vents which expel waste gas in the rare case of an internal short circuit preventing an explosion.
COLT ANACONDA .44 MAG 6″ BBL STS
$3,999.99
FENIX ALG-05 TAC REMOTE SWITCH MOUNT
$24.99The Fenix ALG-05 tactical remote pressure switch mount is specially designed for Fenix AER series tactical remote pressure switches (remote pressure switches must be purchased separately). With a simple push, quickly and easily attach the mount to any standard Picatinny rail. This creates a secure hold for the AER pressure switch. The body of the mount is made of aluminum alloy with hard-anodized finish, and it is non-reflective with a matte black finish, making it better for tactical concealment.
MILLETT ANGLE-LOC RING 1″ HIGH NICKLE
$36.99Millett’s Angle-Loc rings are made from heat-treated nickel steel. Rings are windage adjustable to help you get the most out of any scope. They also feature interlocking alignment guides and magnum recoil splines, and are 30 to 50% lighter than other steel rings.
MILLETT ANGLE-LOC RING 1″ MEDIUM NICKLE
$36.99Millett’s Angle-Loc rings are made from heat-treated nickel steel. Rings are windage adjustable to help you get the most out of any scope. They also feature interlocking alignment guides and magnum recoil splines, and are 30 to 50% lighter than other steel rings.
- Type : Angle-Loc
- Size : 1″
- Height : Medium
- Tube Diameter : 1″
- Finish : Nickel
MILLETT ANGLE-LOC RING 30MM HIGH MATTE
$36.99Millett’s Angle-Loc Weaver-Style rings are made from heat-treated nickel steel. Rings are windage adjustable to help you get the most out of any scope. They also feature interlocking alignment guides and magnum recoil splines, and are 30 to 50% lighter than other steel rings.
Material: Steel
Style: Weaver
Ring Diameter: 30mm
SECUREIT AGILE MODEL 52 DOOR ORGANIZER
$114.99
FENIX AER-03 TAC REMOTE PRESSURE SWITCH
$28.99Featuring momentary-on, constant-on and output selection (functions may vary with flashlights), Fenix AER-03 Remote Pressure Switch is dedicated for tactical flashlight. Noiseless design with attached Velcro makes it convenient in your tactical missions or hunting.